Mechanism of effective nocardioform foam control measures for non-selector activated sludge systems.

Solids retention time (SRT), biological scum trapping and recycle, and the dynamic equilibrium between Nocardioform populations in the foam and the mixed liquor are the controlling factors in activated sludge foaming events caused by Nocardioform bacteria. For the operating modes described in this paper, a cured mixed liquor foaming condition (filament counts of approximately 10(5) intersections/g volatile suspended solids) was only achieved when SRT control, selective wasting, and polymer addition were in effect. Solids retention time control, with the SRT remaining below 1.5 days, and selective wasting will cure a severely foaming mixed liquor, but effects will only be observed after 3 or 4 months after implementation. The combined wastage of Nocardioform bacteria from selective wasting and SRT control can ensure long-term foam control to the operation of a pure-oxygen activated sludge system with foam-trapping features. An SRT of 0.3 days will result in the complete washout of Nocardioform bacteria from the activated sludge system, which can then operate at an SRT of 3 days free of Nocardioform. Polymer addition to mixed liquor is only effective for foam control when a large portion of the system biomass exists as a heavy layer of foam above the mixed liquor.     

Removal of ammonia by biofilters: a study with flow-modified system and kinetics

The characteristics of ammonia removal by two types of biofilter (a standard biofilter with vertical gas flow and a modified biofilter with horizontal gas flow) were investigated. A mixture of organic materials such as compost, bark, and peat was used as the biofilter media based on the small-scale column test for media selection. Complete removal capacity, defined as the maximum inlet load of ammonia that was completely removed, was obtained. The modified biofilter showed complete removal up to 1.0 g N/kg dry material/day. However, the removal capacity of the standard biofilter started to deviate from complete removal around 0.4 g N/kg dry material/day, indicating that the modified biofilter system has higher removal efficiency than the standard upflow one. In kinetic analysis of the biological removal of ammonia in each biofilter system, the maximum removal rate, Vm, was 0.93 g N/kg dry material/day and the saturation constant, Ks, was 32.55 ppm in the standard biofilter. On the other hand, the values of Vm and Ks were 1.66 g N/kg dry material/day and 74.25 ppm, respectively, in the modified biofilter system.     

Characteristics of fungal flora in onion farmlands with potential link to human mycotic keratitis

Acquisition of mycotic keratitis has been linked to agricultural activities. Although fungi were identified in injured eyes, data derived directly from farmlands are limited. Following five cases of fungal corneal ulcers in onion harvesters in the monsoon area of Taiwan, the present study further determined fungi genera and their concentrations in onion crops and surface soils of onion farmlands. In total, 52, 100 and 100 samples of soils, onion leaves and bulb scales, respectively, were collected from three monsoon and one non-monsoon farmlands. Fungal colonies were counted and microscopically examined after incubation at 25°C for 4–7 days on malt extract agar with 40?g?mL^?1 chloramphenicol. Results showed the peak fungi levels were mostly observed at harvest time. Among keratitis-related fungi, Aspergillus predominated in soils as well as in onion bulb scales, while Alternaria in onion leaves. Cladosporium was also prevalent in soils, onion leaves and scales. Other keratitis-related fungi included Acremonium, Curvalaria, Fusarium, Mycelia, Penicillium, Rhizoctonia and Rhizopus. The present study provides an exposure link between onion harvesters and presence of keratitis-related fungi from onion crops and soils, which may account for mycotic ocular infection via hand-to-eye contact and airborne transmission during the monsoon season.     

Effects of the Ellagic acid on the N‐Acetyltransferase activity and Acetylation of 2‐aminofluorene in the rat

The effects of the ellagic acid on the in vitro and in vivo acetylation of 2‐aminofluorene were investigated in male Sprague‐Dawley rats. For in vitro examination, cytosols with or without ellagic acid co‐treatment showed different percentage of 2‐aminofluorene acetylation. For in vivo examination, pre‐treatment of male rats with ellagic acid (10 mg/kg) 24h prior to the administration of 2‐aminofluorene (50 mg/kg) resulted in a 26% and 29%, respectively, decrease in the urinary and fecal recovery of N‐acetyl‐2‐aminofluorene, and a 37% decrease in the metabolic clearance of 2‐aminofluorene to N‐acetyl‐2‐aminofluorene. This is the first demonstration that ellagic acid decrease the N‐acetylation of carcinogens in vitro and in vivo.     

Sustainable recycling model: A comparative analysis between India and Tanzania

Higher economic growth in developing countries has caused higher amounts of wastes. Local government authorities in these countries usually fail to provide adequate services to dispose the increasing amounts of waste, resulting in threats for both the population and environment health. There is therefore an urgent need for recycling as a form of waste management in order to stop the devastating effects of solid waste in developing countries. Using a qualitative method of analysis, this study presents a model to measure and rank the sustainability of recycling programs in India and Tanzania. The model consists of six main constructs including “production, economic, governmental, social, technological, and international factors”. The results showed that India outperforms Tanzania in sustainable recycling programs: per capita waste generated per day in Delhi is higher than in Dar es Salaam; the government of India focuses more on developing recycling plans and techniques as compared to the government of Tanzania where the country is not actively involved in the recycling process; and the solid waste management planning in India is being performed better than Tanzania.     

Benefits of Bt cotton counterbalanced by secondary pests? Perceptions of ecological change in China

In the past, scientific research has predicted a decrease in the effectiveness of Bt cotton due to the rise of secondary and other sucking pests. It is suspected that once the primary pest is brought under control, secondary pests have a chance to emerge due to the lower pesticide applications in Bt cotton cultivars. Studies on this phenomenon are scarce. This article furnishes empirical evidence that farmers in China perceive a substantial increase in secondary pests after the introduction of Bt cotton. The research is based on a survey of 1,000 randomly selected farm households in five provinces in China. We found that the reduction in pesticide use in Bt cotton cultivars is significantly lower than that reported in research elsewhere. This is consistent with the hypothesis suggested by recent studies that more pesticide sprayings are needed over time to control emerging secondary pests, such as aphids, spider mites, and lygus bugs. Apart from farmers?? perceptions of secondary pests, we also assessed their basic knowledge of Bt cotton and their perceptions of Bt cotton in terms of its strengths and shortcomings (e.g., effectiveness, productivity, price, and pesticide use) in comparison with non-transgenic cotton.     

Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.     

STOCHASTIC WATER QUALITY ANALYSIS USING RELIABILITY METHOD1

ABSTRACT: This study developed a QUAL2E‐Reliability Analysis (QUAL2E‐RA) model for the stochastic water quality analysis of the downstream reach of the main Han River in Korea. The proposed model is based on the QUAL2E model and incorporates the Advanced First‐Order Second‐Moment (AFOSM) and Mean‐Value First‐Order Second‐Moment (MFOSM) methods. After the hydraulic characteristics from standard step method are identified, the optimal reaction coefficients are then estimated using the Broyden‐Fletcher‐Goldfarb‐Shanno (BFGS) method. Considering variations in river discharges, pollutant loads from tributaries, and reaction coefficients, the violation probabilities of existing water quality standards at several locations in the river were computed from the AFOSM and MFOSM methods, and the results were compared with those from the Monte Carlo method. The statistics of the three uncertainty analysis methods show that the outputs from the AFOSM and MFOSM methods are similar to those from the Monte Carlo method. From a practical model selection perspective, the MFOSM method is more attractive in terms of its computational simplicity and execution time.     

Bioabsorbable Soy Protein Plastic Composites: Effect of Polyphosphate Fillers on Biodegradability

The use of biodegradable polymers made from renewable agricultural products such as soy protein isolate has been limited by the tendency of these materials to absorb moisture. A straightforward approach for controlling the inherent water absorbency of the biodegradable polymers involves blending special bioabsorbable polyphosphate fillers, biodegradable soy protein isolate, plasticizer, and adhesion promoter in a high-shear mixer followed by compression molding. The procedure yields a relatively water-resistant, biodegradable soy protein polymer composite, as previously reported. The aim of the present study is to determine the biodegradability of the new polyphosphate filler/soy protein plastic composites by monitoring the carbon dioxide released over a period of 120 days. The results suggest that the composites biodegrade satisfactorily, with the fillers having no significant effect on the depolymerization and mineralization of the soy protein plastic, processes that would otherwise result in nonbiodegradable composites. Further, the results indicate that the biodegradation and useful service life of these biocomposites may be controlled by changing the filler concentration, making the biocomposites useful in applications in which the control of water resistance and biodegradation is critical.     

Comment on "Removal of heavy metals from aqueous solution by carbon nanotubes: adsorption equilibrium and kinetics" by Li, Y. H., Di, Z.C., Luan, Z.K., Ding, J., Zuo, H., Wu, X.Q., Xu, C.L. and Wu, D.H.

Recently, Li et al. (Li, 2004 ) published the paper entitled as above. In section 2.2: Adsorption kinetics,authors mentioned three kinetic models, the first-order rate equation, pseudo-second-order rate equation, and secondorder rate equation citing a secondary reference (Benguella,2002). However, there are mistakes occurred in this reference(Ho,2004a).